leaded oscillator, tcxo, tcvcxo i121/i122/I321/i322 series metal package, full size dip ilsi america phone: 775-851-8880 ? fax: 775-851-8882? e-mail: e-mail@ilsiamerica.com ? www.ilsiamerica.com 1/10_a specifications subject to change without notice page 1 15.00 7.60 0.45 4.0 2.5 5.8 max. 4.0 min. 1.0 11.7 18.3 pin connection 1 vcontrol / n.c. 7 gnd 8 output 14 vcc dimension units: mm 0.50 product features: applications: available in both clipped sinewave and base station hcmos output levels ip compatible with leadfree processing wimax / wlan general purpose note: a 0.01 f bypass capacitor is recommended between vcc (p in 4) and gnd (pin 2) to minimize power supply noise. ** not available for all temperature ranges. frequency i121/I321 i122/i322 9.600 mhz to 40 mhz 1.000 mhz to 40 mhz output level clipped sinewave hcmos 1.0 v p-p min. ?0?=0.1 vcc max., ?1?=0.9vcc min. output load clipped sinewave hcmos 20k ohms / 10 pf 15pf duty cycle (hcmos) 50% 10% rise / fall time (hcmos) 10 ns max. frequency stability see frequency stability table frequency tolerance @ 25 c included in stability tolerance aging 1 ppm / year max. supply voltage see supply voltage table , tolerance current 3.0 ma max. (clipped sinewave) 20.0 ma max. (hcmos) voltage control (I321/ i322) 1.65 vdc 1.5 vdc, 5.0 ppm min. for vcc = 3.3 vdc 2.5 vdc 2.0 vdc, 5.0 ppm min. for vcc = 5.0 vdc slope positive operating see operating temperature table storage -40 c to +85 c part number guide sample part number: i121-1q3-20.000 mhz package operating temperature frequencystabilit y vs temperature supply voltage frequency i121 (clipped sinewave tcxo) i122 (hcmos tcxo) I321 (clipped sinewave tcvcxo) i322 (hcmos tcvcxo) 7 = 0 c to +50 c **o = 1.5 ppm 3 = 3.3 v - 20.000 mhz 1 = 0 c to +70 c **p = 2.0 ppm 5 = 5.0 v 3 = -20 c to +70 c q = 2.5 ppm 2 = -40 c to +85 c r = 3.0 ppm j = 5.0 ppm http://www..net/ datasheet pdf - http://www..net/
leaded oscillator, tcxo, tcvcxo i121/i122/I321/i322 series metal package, full size dip ilsi america phone: 775-851-8880 ? fax: 775-851-8882? e-mail: e-mail@ilsiamerica.com ? www.ilsiamerica.com 1/10_a specifications subject to change without notice page 2 pb free solder reflow profile: typical application: *units are backward compatible with 240c reflow processes package information: msl = 2a termination = e1 (sn / cu / ag over ni over kovar base metal). environmental specifications thermal shock mil-std-883, method 1011, condition a moisture resistance mil-std-883, method 1004 mechanical shock mil-std-883, method 2002, condition b mechanical vibration mil-std-883, method 2007, condition a resistance to soldering heat j-std-020c, tabl e 5-2 pb-free devices (except 2 cycles max) hazardous substance pb-free / rohs / green compliant solderability jesd22-b102-d method 2 (preconditioning e) terminal strength mil-std-883, method 2004, test condition d gross leak mil-std-883, method 1014, condition c fine leak mil-std-883, method 1014, condition a2, r1=2x10-8 atm cc/s solvent resistance mil-std-202, method 215 marking line 1: ilsi and date code line 2: ixxx-xxx (part number detail = i xxx - xxx -freq.) line 3: frequency http://www..net/ datasheet pdf - http://www..net/
|